Audi RSQ3 2011-2017 front bumper lower splitter Lip black FRP

Audi RSQ3 front splitter. Elevate your Audi RSQ3’s style with our sleek black FRP front bumper lower splitter Lip.

ITEM DESCRIPTION:

• We design and manufacture our Audi RSQ3 front splitter in-house from high-grade FRP (fiber reinforced plastic).
• Please be aware that the finish on our front splitter/lip is not gloss black paint, however, if you are happy with the finish you can install it, otherwise, you can paint it.

​​ITEM SPECIFICATIONS:

• Length​: ​182 cm / 71.65 inch.
• ​Width: 53 cm / 20.86 inch.​​​

​​INSTALLATION:

1. Prepare the Surface: Clean the area of the front bumper where the splitter will be installed. Use panel wipe to ensure the surface is free from dirt, grease, and residue. Allow it to dry completely.

2. Position the Splitter: Place the splitter on the front bumper to check the fit and alignment. Use masking tape to temporarily secure it in place, making any necessary adjustments to ensure proper alignment.

3. Mark the Mounting Points: Once satisfied with the placement, mark the spots on the bumper where the screw holes on the splitter align.

4. Drill Pilot Holes: Carefully drill pilot holes at the marked spots on the bumper. Ensure the holes are the appropriate size for the screws you’ll be using.

5. Apply Silicone Adhesive: Apply a thin, even layer of automotive silicone adhesive along the backside of the splitter that will come in contact with the bumper. This will help create a secure seal and prevent any potential vibrations.

6. Secure the Splitter: Line up the splitter with the pilot holes and carefully place it onto the front bumper. Insert screws through the pre-drilled holes on the splitter into the pilot holes on the bumper. Use a screwdriver to tighten the screws securely but avoid over-tightening to prevent damage.

7. Cleanup and Final Adjustments: Wipe away any excess silicone or smudges with a clean cloth. Double-check the alignment of the splitter and make any final adjustments if needed.

8. Allow for Cure Time: Follow the manufacturer’s instructions for the automotive silicone adhesive regarding curing time. It’s typically recommended to let it cure for at least 24 hours before driving.

• We strongly recommend professional installation by experienced technicians who are well-versed in automotive upgrades.
• For any additional questions or assistance, don’t hesitate to contact our dedicated support team. We’re here to help you make the most of your automotive upgrade experience.

Please Note: This item is custom-made specifically to order (“made to order”). Due to its unique nature, special items are excluded from our return and refund policy (“Non-refundable”).

​​FITMENT:

• 2011-2017 OEM RSQ3 front bumper.
• 2011-2017 XUK RSQ3 style front bumper conversion.

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.
• If you want an exact delivery price, please email us at xenonzuk@gmail.com with your full postal address and we will give you a quotation.

Questions about this product? Get a shipping quote